Toshiba CS3950D - Manual (Page 9)

3
D4133738B
(a)Non-reset mode (Under internal sync / external sync --- Consecutive VD IN)
Exposure starts at the timing of TRIG signal IN. After each exposure is completed, the
camera outputs video at each next VD IN timing.
(b) Non-reset mode (Under external sync --- Single VD IN)
After TRIG IN and exposure, the camera goes into standby until next ext. VD IN.
*Don’t provide ext. VD IN during exposure.
** After automatic return, fix ext. VD IN at Hi.
(c)V-reset mode (Under internal sync / external sync --- No VD IN)
Exposure starts at the timing of TRIG signal IN. After each exposure is completed, the
camera outputs video immediately by resetting VD. (HD is not reset)
VIDEO OUT
Exposure time
(E-shutter speed or
pulse width)
CCD Exposure
TRIG IN
(Positive)
Outputs video at the next VD
timing after exposure
Automatically returns to normal shutter
if fixed H level (after approx. 1/6s)
Random trigger shutter Normal shutter
TRIG IN not acceptable for
1V after mode chenge
Definite
INT/EXT VD
Outputs VD,V-SYNC
during standby
WEN OUT
(Standard)
Normal shutter
In sync with ext.VD during standby
(No video output)
TRIG IN
(Positive)
EXT VD
CCD Exposure
VIDEO OUT
WEN OUT
(Standard)
TRIG IN not acceptable for
1V after mode chenge
Automatically returns to normal shutter
if fixed H level (after approx. 1/6s)
Exposure time
(E-shutter speed or
pulse width)
Outputs video at the next VD
timing after exposure
Normal shutter Random trigger shutter Normal shutter
Definite