Toshiba FT-8981 - Manual (Page 19)

BASIC OPERATION
19
BASE SPEAKER VOLUME SETTING
To adjust the base unit speaker volume, press or .
TONE/PAUSE
INTERFERENCE OR STATIC
If you hear noise during a call, press to
select another channel. The LCD displays
“Scanning” while changing a channel.
PAGING THE HANDSET
1
To locate the handset while it is off the base,
press
. The handset beeps for 60
seconds.
To stop paging, press or any
key at the handset, or return the
handset to the base unit.
NOTE:
You cannot page the handset during a call.
PAGE
PAGE
CH
VOLUME/– VOLUME/+
Paging
Talk 0:15
Scanning
To
To temporarily switch to tone dial
(When the base is set to pulse mode), see
page 14.
To enter a pause within the dialing sequence
Do this
Press . The following numbers will
be sent as tone dialing.
Press . “P” appears in the display
which represents a pause.
PAUSE
TONE/
Basics
PAGE
FT-8981.qx 3/14/1 6:00 PM Page 19