Texas Instruments TI-83 PLUS - Manual (Page 502)

TI-83 Plus Programming 499
8. Press Í to paste prgmCYLINDER to the
current cursor location. (If CYLINDER is not item
1 on your
PRGM EXEC
menu, move the cursor to
CYLINDER before you press Í .)
9. Press Í to execute the program. Enter 1.5
for the radius, and then press Í . Enter 3 for
the height, and then press Í . The text
VOLUME IS , the value of V , and Done are
displayed.
Repeat steps 7 through 9 and enter different
values for
R and H .