Texas Instruments TI-83 PLUS - Manual (Page 655)

TI-83 Plus Communication Link 652
Error Conditions
A transmission error occurs after one or two seconds if:
•
A cable is not attached to the sending unit.
•
A cable is not attached to the receiving unit.
Note: If the cable is attached, push it in firmly and try again.
•
The receiving unit is not set to receive transmission.
•
You attempt a backup between a TI-73, a TI-82, or a TI-83 and a
TI-83 Plus .
•
You attempt a data transfer from a TI-83 Plus to a TI-83, TI-82, or
TI-73 with variables or features not recognized by the TI-83, TI-82, or
TI-73.
•
New variable types and features not recognized by the TI-83, TI-82,
or TI-73 include applications, application variables, grouped
variables, new variable types, or programs with new features in them
such as
Archive , UnArchive , SendID , SendOS , Asm( , AsmComp( , and
AsmPrgm .
•
You attempt a data transfer from a TI-83 Plus to a TI-82 with data
other than real lists L 1
through L 6
or without using menu item
5:Lists to TI82 .