Texas Instruments TI-83 PLUS - Manual (Page 480)

TI-83 Plus Applications 477
Data Collection Results
The calculator automatically converts all collected data points into list
elements using the following list names (you cannot rename the lists):
Probe Time Values ( X) stored to: Data Results ( Y) Stored to:
Temp ¨
TTEMP
¨
TEMP
Light ¨
TLGHT
¨
LIGHT
Volt ¨
TVOLT
¨
VOLT
Sonic ¨
TDIST
¨
DIST
To see all elements in one of these lists, you can insert these lists into
the List editor just as you would any other list. Access list names from
the
-
9
NAMES
menu.
Note: These lists are only temporary placeholders for data results for any
particular probe. Therefore, every time you collect data for one of the four
probes, the list pertaining to that probe is overwritten with data results from the
most recently collected data.
If you want to save data results from more than one data collection, copy
all list elements that you want to save to a list with a different name.
Also, the
GAUGE
data collection method stores data results to the same
list names, overwriting previously-collected data results, even those
collected using the
DATA LOGGER
data collection method.