Texas Instruments TI-83 PLUS - Manual (Page 640)

TI-83 Plus Communication Link 637
3. Press Í to select 1:Transmit . The name and type of each item are
displayed line-by-line on the sending unit as the item is queued for
transmission, and then on the receiving unit as each item is
accepted.
Note: Items sent from the RAM of the sending unit are transmitted to the
RAM of the receiving unit. Items sent from user data archive of the sending
unit are transmitted to user data archive of the receiving unit.
After all selected items have been transmitted, the message Done is
displayed on both calculators. Press } and † to scroll through the
names.
Stopping a Transmission
To stop a link transmission, press É . The
Error in Xmit
menu is displayed
on both units. To leave the error menu, select 1:Quit .