Texas Instruments TI-83 PLUS - Manual (Page 653)

TI-83 Plus Communication Link 650
Backing Up RAM Memory
Warning: H:Back Up overwrites the RAM memory and mode settings in
the receiving unit. All information in the RAM memory of the receiving
unit is lost.
Note: Archived items on the receiving unit are not overwritten.
You can backup the contents of RAM memory and mode settings (no
Flash applications or archived items) to another
TI-83 Plus Silver Edition .
You can also backup RAM memory and mode settings to a TI-83 Plus.
To perform a RAM memory backup:
1. Use a unit-to-unit cable to link two TI-83 Plus Silver Edition units, or a
TI-83 Plus Silver Edition and a TI-83 Plus together.
2. On the sending unit press y 8 and select H:Back Up . The
MEMORYBACKUP
screen displays.
3. On the receiving unit, press y 8 ~ to display the RECEIVE
menu.
4. Press Í on the receiving unit.