Toshiba G500 - Manual (Page 29)

Getting Started
28
Getting Started
Charging the battery
You need to fully charge the battery before you can
switch your Toshiba phone on for the first time.
The battery will only achieve optimum performance
after two or three complete charges.
You can charge your battery in the following two
ways:
1. Plug the AC adapter into an AC outlet and
connect to the charger connector on your
Toshiba phone. When the battery is fully
charged, unplug the AC adapter from the AC
outlet and disconnect it from the phone charger
connector by gripping tightly and pulling gently.
or
2. .Connect your Toshiba phone to a PC with the
USB cable. Ensure that your Toshiba phone is
on before connecting it to your PC.
Low battery indicator
When the battery charge level is running low, a
warning tone sounds and the Battery Low message
is displayed repeatedly. If the battery charge level
runs too low for normal operation, your Toshiba
phone will automatically switch off.
Battery information
Battery performance depends on many factors,
such as your Service Provider's network
configuration, signal strength, the temperature of
the environment in which you operate your Toshiba
phone, the features and/or settings you select and
use, items attached to your phone's connecting
ports, and your voice, data, and other program
usage patterns.
Checking the battery power
From the Home screen, select Start > Settings >
Power Management.
Optimizing the power performance
From the Home screen, select Start > Settings >
Power Management, and adjust the backlight,
display, and Wi-Fi settings.
TIP: To check your battery status, select
Start > Settings > Power Management.