Toshiba SATELLITE M30X - Manual (Page 158)

158 If Something Goes Wrong
Problems when you turn on the computer
5.375 x 8.375 ver 2.3
6 Save the file and refer to it when you contact the software
manufacturer.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cord/cable
properly or installed a charged battery.
Press and hold down the power button for a few seconds.
If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.
The computer starts but, when you press a key, nothing
happens.
You are probably in Standby mode and have a software or
resource conflict. When this happens, turning the power on
returns you to the problem instead of restarting the system.
To clear the condition, press the power button until it turns off
the computer.
Clearing the condition may get the computer running, but it
will not solve a resource conflict. Read the documentation
that came with the conflicting device and
“Resolving a
hardware conflict” on page 161 .
The computer displays the WARNING RESUME FAILURE
message.
The computer was placed in Standby mode and the battery
has discharged. Data stored in the computer’s memory has
been lost. Press
Enter to continue booting.
To charge the battery, leave the computer plugged into a live
wall outlet for several hours. For more information, see
“Power and the batteries” on page 166 .
The computer displays the Non-System disk or disk error message.
Press any key. If this does not resolve then problem, press Ctrl,
Alt , and Del to restart the computer.