Toshiba SATELLITE M30X - Manual (Page 65)

65 Getting Started
Setting up your printer
5.375 x 8.375 ver 2.3
To connect a USB printer:
1 Plug the USB connector into one of the USB ports on your
computer
2 Plug the printer’s power cable into a live AC outlet.
Connecting a Parallel Printer
To connect a parallel printer:
Connecting the parallel printer cable while the computer is on
may damage the printer, the computer, or both.
1 Connect the printer cable to the printer and to the computer’s
parallel port.
Sample identifying the ends of a parallel printer cable
2 Plug the printer’s power cable into a live AC outlet.
See your printer documentation for additional configuration
steps.
Setting up your printer
If you started your computer with a printer connected and
turned on, it may have been detected automatically (Plug and
Play). If this is not the case, then you must install the printer
driver for the model of printer that is connected to your
computer. You install the printer driver either by following
the instructions indicated in your printer manual, or by using
the operating system Add Printer Wizard.
If you plan to set up a printer later, click Cancel.
To the computer To the printer