Manual tu ning (dvb), Country setting, Select a channel – Toshiba RD-XV48DTKF User Manual

Page 28

Advertising
background image

28

EN

Manual Tuning (DVB)

You can preset a DVB channel manually and
individually.

1

Follow steps

1

to

3

in “Auto Tuning

(DVB)” on page 27.

2

Select “Manual Tuning” using
[

U \ D], then press [ENTER].

3

Select your desired position number
using [

U \ D], then press [ENTER].

• The tuner will begin to search up or down

automatically. When a DVB channel is found,
the unit will stop searching.

• When “Auto” is selected the unit will search for

the channels which have not been stored in
channels memory.

4

Press [SETUP] to activate the setting.

Country Setting

You can set the DVB channels to Channel Plan of
each country.

1

In stop mode, press [SETUP]. Select
“General Setting”
using [

U \ D],

then press [ENTER].

2

Select “Channel” using [

U \ D],

then press [ENTER].

3

Select “Country” using [

U \ D], then

press [ENTER].

4

Select your desired country using
[

U \ D], then press [ENTER].

5

Press [SETUP] to exit.

Select a Channel

You can select memorised channels by using
[PROG.

G \ H].

You can select a channel using [PROG.

G \ H] or

directly enter the channel using
[the Number buttons].

Notes on using [the Number buttons]:
• For one or two-digit number channels, the channels

will be identified 2 seconds after you press the
channel number, or right after you press [ENTER].
For example, if you want to select channel 6, press
[6] and wait for 2 seconds or press [ENTER]. You
can only select channels 1 to 999.

• Analogue channels will be stored in channel 901-

999 and DVB channels will be stored in channel 1-
900 after it is scanned by this unit.

To switch DVB, analogue and external input (AV1/
AV2/AV3/DV(AV4)) mod
e.
You can switch between DVB, analogue and external
input (AV1/AV2/AV3/DV(AV4)) mode by pressing
[INPUT SELECT

F] repeatedly. The mode changes

as follows:

• You can also switch the mode by using

[PROG.

G \ H].

• You can select any DVB channels using

[the Number buttons] when you are in analogue or
external input (AV1/AV2/AV3/DV(AV4)) mode.

• You can select any analogue channels using

[the Number buttons] when you are in DVB mode.

DVB

DVB

Manual Tuning (DVB)

Channel

Auto

Auto Tuning (DVB & ANALOG)
DVB Channel Setup
ANALOG Channel Setup

Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All

Country

General Setting

Country

France
Spain
Germany
Italy
Switzerland

DVB mode

„ Analogue mode „ AV1 „ AV2 „ AV3 „ DV(AV4)

E3NG0FD_EN.book Page 28 Wednesday, January 30, 2008 10:37 AM

Advertising