Toshiba RD-XV48DTKF - Manual (Page 32)

32 EN
TV View Operation
The following operations are available while viewing
TV channels through this unit’s tuner.
Selecting the TV Aspect Ratio
You can select the TV aspect ratio to match the format
of the programme you are playing back with the unit
and that of your TV screen (4:3 standard or 16:9 wide
screen TV).
1
In stop mode, press [SETUP]. Select
“General Setting” using [
U \ D],
then press [ENTER].
2
Select “Video” using [ U \ D], then
press [ENTER].
3
Select “TV Aspect” using [
U \ D],
then press [ENTER].
4
Select the desired option using
[
U \ D], then press [ENTER].
5
Press [SETUP] to exit.
Hint
If you have a standard TV:
• Select “4:3 Letter Box” for a full width picture
with black bars at the top and bottom.
• Select “4:3 Pan & Scan” for a full height picture
with both sides trimmed.
If you have a wide screen TV:
• Select “16:9 Wide”.
Selecting the Audio Mode
You can switch between TV audio modes by pressing
[AUDIO
D]. Each mode is indicated on the TV
screen.
• During reception of analogue bilingual broadcasts
• If the programme does not have more than one
sound track, [AUDIO D] is not effective.
Digital Teletext Reception
Many broadcasters provide a DVB Teletext service in
the form of a dedicated Teletext channel. This Digital
service includes high quality text and graphics along
with advanced navigation options.
1
Press [TEXT] to display Teletext
screen.
• Teletext for the TV channel you have selected
will be displayed.
2
Use [RED] / [GREEN] / [YELLOW] /
[BLUE] to follow the instructions on
screen.
3
Press [TEXT] to switch the Teletext
display off.
Note
• [TEXT] is not available during recording.
EPG (Electronic Programme Guide)
Electronic programme guide (EPG) gives you a list of
the DVB programmes and detailed information about
the programmes. To call up EPG while viewing DVB/
analogue channel or external input (AV1/AV2/AV3/
DV(AV4)), press [GUIDE]. You can also call up EPG
by following steps.
1
In stop mode, press [SETUP]. Select
“Timer Programming” using [
U \ D],
then press [ENTER].
2
Select “EPG” using [
U \ D], then
press [ENTER].
• Select the TV programme using
[ U \ D \ L \ P], then press [SETUP] or
[GUIDE] to exit.
• From the EPG screen, you can also set the
timer recording. Select the TV programme using
[
U \ D \ L \ P], then press [ENTER] or
[BLUE] to go to “Timer Programming” menu.
Refer to “Timer Recording (EPG)” on page 48.
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
TV Aspect
Video Out
General Setting
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
ANALOG
Mode Audio output
Display on
the TV screen
Main Main audio from both speakers Main
Sub Sub audio from both speakers Sub
Main /
Sub
• Main audio from the left speaker
• Sub audio from the right speaker
Main/Sub
DVB
E3NG0FD_EN.book Page 32 Wednesday, January 30, 2008 10:37 AM