Teac D-01 User Manual

Page 3

Advertising
background image

3

Contents

Thank you for choosing Esoteric. Read this manual
carefully to get the best performance from this unit.

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

i.LINK (IEEE 1394) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Example: Connection to the P-01 and the G-0/G-0s . . . . . . . . . 8

Names of Each Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

First Thing To Do. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Basic Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Changing the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Messages on the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before Use

Read this before operation

<

As the unit may become warm during operation, always leave
sufficient space around the unit for ventilation.

<

The voltage supplied to the unit should match the voltage as
printed on the rear panel. If you are in any doubt regarding
this matter, consult an electrician.

<

Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibrations and excessive dust, heat,
cold or moisture.

<

Do not place the unit on the amplifier/receiver.

<

Do not open the cabinet as this might result in damage to the
circuitry or electrical shock. If a foreign object should get into
the unit, contact your dealer or service company.

<

When removing the power plug from the wall outlet, always
pull directly on the plug, never yank the cord.

<

Do not attempt to clean the unit with chemical solvents as
this might damage the finish. Use a clean, dry cloth. A soft
cloth moistened with a diluted amount of household or
window cleaner can be used to remove more stubborn dirt.

<

Keep this manual in a safe place for future reference.

Pin-point foot

Bottom plate
of the unit

Steel foot

Cover foot retaining screws

Cover foot

Chassis

What’s in the box

Please confirm that the following accessories are in the box
when you open it.

Power cord x 1
Felt pads x 4
Owner’s manual x 1
Warranty card x 1

Placement of the unit

High-quality hardened tool steel is used for the pin-point feet,
securely attached to the bottom of the player. Although the
cover feet may appear loose, as the weight of the unit is
applied, they become firm and secure. This design effectively
damps and reduces vibration.

<

Be careful to avoid injury when moving the unit, on account
of its weight. Get someone to help you if necessary.

<

To protect floors, etc. you may stick the felt pads supplied
with the unit to the bottom of the cover feet.

Advertising