Toshiba 34HDX82 - Manual (Page 7)

7
Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
ANT-1 OUT ANT-2
ANT(75 )
S-VIDEO
VIDEO
L/
MONO
AUDIO
R
VIDEO-2 VIDEO-1
Y
P B
P R
L
Y
P B
P R AUDIO
COLOR
STREAM
HD - 2 COLOR
STREAM
HD - 1
R
L
AUDIO
R
OUT
AUDIO
CENTER
CHANNEL IN
L/
MONO
AUDIO
ON OFF
VIDEO
VAR
AUDIO
L
R R
I N
I N
L
R
DVI / HDCP
IN
IN from ANT
VIDEO AUDIO
OUT to TV
CH 3
L R
CH 4
IN
OUT
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have an S-VHS VCR, use an S-video
cable instead of a standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 (or Video-2) at
the same time, or the picture performance
will be unacceptable.
From cable box or antenna
Stereo VCR
TV
Connecting your TV
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Connecting a VCR
This connection allows you to watch local channels and video
programs, record on the VCR while watching TV, and record one
channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
Coaxial (antenna) cable
Standard stereo A/V cables
(typically color-coded yellow for video,
red and white for audio)
S-video cable
Component video cables
(typically color-coded red, green, blue)
DVI-D digital single-link cable
Note: Cables are not provided with your TV.
Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable
converter box. Coaxial cable uses “F” connectors.
Standard stereo A/V cables usually come in sets of three, and are typically color-coded
according to use: yellow for video, red for stereo right audio, and white for stereo left (or
mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as
the cables.
S-video cable is for use with video equipment that has an S-Video connector.
Component video cables come in sets of three (typically color-coded red, green, and
blue), and are for use with video equipment that has component video connectors. Your
TV’s ColorStream
® (component video) inputs are color-coded in the same manner as the
cables.
DVI-D digital single-link cable is for use with video equipment that has a DVI-D digital
single-link connector (see page 13).
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
For GOOD picture quality: Use a standard yellow stereo A/V video cable.
For BETTER picture quality: If your equipment has an S-video connector, use an
S-video cable instead of a standard yellow video cable. (You still must connect the
standard red and white audio cables for full system connection, but do not connect
a standard yellow video cable at the same time or the picture performance will be
unacceptable.)
For BEST picture quality: If your equipment has component video connectors,
use component video cables instead of a standard yellow video cable or S-video cable
(plus the standard red and white audio cables for full system connection.) If your
equipment has a DVI-D digital single-link connector, use a DVI-D cable (plus standard
red and white audio cables connected to ”DVI/HDCP IN” for full system connection).
CAUTION: Do not plug in any power cords
until you have finished connecting all equipment.
34HDX82(E)07-14 8/20/02, 3:56 PM 7