Toshiba TDP-MT500 - Manual (Page 17)

17
VIEWING VIDEO IMAGES
A. Connecting the projector to video equipment
Preparations:
•
Check to be sure that the power for the projector and video equipment is turned off.
1 Connect an end of a commercially available
video cable to the VIDEO terminal of the
projector.
2 Connect the other end of the video cable to
the video output terminal of the video equip-
ment.
If an S-video output terminal is provided with the
video equipment, make the connection as follows:
3 Connect an end of a commercially available
S-video cable to the S-VIDEO terminal of the
projector.
4 Connect the other end of the S-video cable
to the S-video output terminal of the video
equipment.
• Also, read the instruction manual of the video equipment to be connected.
• The projector does not have a speaker. To reproduce audio signals, you must connect audio equipment.
• Consult the delivery agent of this projector on the detailed connections, as needed.
Connecting to DVD players
When connecting this projector to a video equipment that has component video output terminals, such as
DVD players, connect video cables to COMPONENT (1 or 2) terminals.
• Playback picture images of some of DVD players may not be able to be properly projected on screen.
S-video cable
3
To S-VIDEO terminal
Video player, or the like.
To S-video output terminal
4
Video cable
1
To VIDEO terminal
Video player, or the like.
To video output terminal
2
C B (P B ) Y C R (P R )
DVD player
Video cables
(Commercially available)
To audio output
terminals To audio input
terminals
To COMPONENT
(1 or 2) terminals