Toshiba TDP-MT500 - Manual (Page 21)

21
VIEWING VIDEO IMAGES
D. Setting the ASPECT
This projector can change the ASPECT ratio (the ratio between the width and length of the image frame)
according to the input video signals.
POWER ON/STANDBY
C1 C2 DVI
D
DVI
A S V
COMP1 COMP2 DVI-D
DVI-A VIDEO S-VIDEO
16:9
16:9 4:3
4:3 ZOOM
ZM
REAL
REAL
DYN
DYNAMIC
1
2 3
ASPECT button
SOURCE
ASPECT
Original video
image
Projects video
images on full
screen (16: 9). Projects video
images at a
ratio of 4: 3. Projects video
images of
input signals
as they are. Projects 4-to-3
signals by
expanding them
to 16-to-9 images
on full screen
(Nonlinear). Projects video
images of
cinemascope
and vista size
together with the
caption.
*or
Bold frames are recommended modes.
* ) In zoom mode, it is possible to switch between display sizes (cinemascope/vista) with the ZOOM button.
In cinemascope mode, it is possible to shift the display position with the
{ , } buttons.
16 : 9 4 : 3 ZOOM REAL DYNAMIC
Picture images
with a ratio of 4: 3
(480i, 576i, 480p,
576p, and PC)
Cinemascope
and vista signals
with a ratio of 4: 3
Projected images
expand in
horizontal direction. PC inputs not less
than SVGA are
projected on full
screen (16: 9).
Squeezed 4-to-
3 images
(480i, 576i,
480p, 576p)
16-to-9 images
(1080i)
16-to-9 images
(720p)
Projected images
are compressed to
the full screen size.
Horizontal and
vertical size of the
projected images are
reduced to a half.
4:3
ZOOM
DYNAMIC
REAL
16:9
ASPECT
Using this function to change the size of the displayed image (i. e. chang-
ing the height/width ratio) for the purpose of public display or commer-
cial may infringe on copyright laws.
How to change the settings:
With the remote control:
1. Press an ASPECT button (16: 9, 4 : 3, ZOOM, DYNAMIC or REAL).
With the operation panel of the projector.
(Refer to page 26 for the method of setting the menu.)
1. Bring up the DISPLAY menu.
2. Select the “ASPECT” by pressing the
{
,
}
buttons.
3. Press the ENTER button.
4. Select a desired image angle by pressing the
{
,
}
buttons.
5. Press the ENTER button.
When canceling the menu:
6. Press the MENU button.