Tascam US-144MKII - Manual (Page 18)

18
TASCAM US-144MKII
Sample Clock Source
The clock source can be set to “Automatic”
or “Internal.”
Automatic (default): If a clock signal is •
input through the DIGITAL IN jack, it is
used. If no signal is input through the
DIGITAL IN jack, this unit’s internal clock
is used.
Internal: This unit’s internal clock is •
always used.
When using digital input, set this to •
“Automatic.”
Digital Output Format
Set the digital output format to “AES/EBU”
or “S/PDIF.”
“ch1 and ch2” and “ch3 and ch4”
This unit sends 4 channels of signals to the
computer by USB.
Use these settings to select which of
this unit’s inputs signals are sent to each
computer input pair.
Select analog inputs or digital inputs.
LINE OUTPUTS and DIGITAL
OUTPUT
The computer inputs 4 channels of signals to
this unit by USB.
Use these settings to select the signals to
be output from this unit’s
LINE OUT and
DIGITAL OUT jacks.
Set them to “ch1 and ch2” or “ch3 and
ch4.”
NOTE
If you want to output Windows Media
Player or iTunes, for example, through
this unit’s DIGITAL OUT, set the “DIGITAL
OUTPUT” to “ch1 and ch2” in the Control
Panel.
USB 1.1 Mode Input Selection
This appears only when operating with USB
1.1.
Set the input source to “analog” or “digital.”
4 – US-144 MKII Control panel settings