To erase recordings, Quick record start, To stop recording temporarily – Tascam D00935220B User Manual

Page 18: To erase recordings quick record start, Important safety precautions, 4 − recording

Advertising
background image

IMPORTANT SAFETY PRECAUTIONS

1

TASCAM 202

MK

IV

4 − Recording

8. When everything is ready, start recording by

pressing the

PAUSE

key or the play key whose

arrow points in the same direction as the indi-
cator.

To record on both tape sides, set the

REV MODE

switch to

Ê

or

ä

and press the forward play

key (y). If you press the reverse

PLAY

key (h),

recording will be done only on side “B”.

To stop recording, press the stop key (

ª

).

A To stop recording temporarily

Press the

PAUSE

key to stop recording temporarily.

A second press of the key resumes recording.

To erase recordings

When you make a recording, the tape is overwritten
(previous recording is erased). To erase a tape without
making a new recording, set the

REC LEVEL

control

to the minimum (0) position and press the

RECORD

key followed by the

PLAY

key (h or y).

Quick record start

Hold down the

RECORD

key and press the

PLAY

key

(h or y) corresponding to the direction you want the
tape to run.

Advertising