Tascam D00935220B - Manual (Page 27)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM 202 MK IV

5 − Reference and specifications
Track System 4-track, 2-channel stereo
Heads Construction Record/playback head x 1 (each deck)
Erase head x 1 (each deck)
Tape Speed 4.8 cm/sec
9.5 cm/sec (high-speed dubbing mode)
Pitch Control ±12%
Fast Winding Time approximately 110 sec (C-60 tape)
Motor DC servo motor (capstan)
Wow and Flutter 0.09% (WRMS) ±0.1%
Frequency Response (Overall)
Metal tape (Type IV, playback only) 30 Hz-19 kHz
Chrome tape (Type II) 30 Hz-18 kHz
Normal tape (Type I) 30 Hz-17 kHz
Signal to Noise Ratio (Overall) 58 dB (Dolby NR OFF, nominal recording level)
69 dB (Dolby NR ON, CCIR-ARM)
Line Input (RCA jack) 100 mV (input impedance 50k ohms)
Mic Input (mono 1/4” Phone jack) 0.38 mV (input impedance 200k ohms)
Line Output (RCA jack) 0.46 V (load impedance 50k ohms or more)
Headphones Output (stereo 1/4” Phone jack) 1 mW/32 ohms
Power Requirements
U.S.A./Canada 120 V AC, 60 Hz
U.K./Europe 230 V AC, 50 Hz
Australia 240 V AC, 50 Hz
Power Consumption 22 W (U.S.A./Canada)
22 W (U.K./Europe)
22 W (Australia)
Dimensions (including protruding parts) 482 (W) x 138.5 (H) x 286 (D) mm (18.95” x 5.45” x 11.26”)
Weight 5.5 kg (12.13 lb)
Specifications
Dimensional drawing
482mm (18.98") 15mm
(0.59") 265mm (10.43") 6mm (0.24")
466mm (18.35")
435mm (17.13")
132.7mm (5.22") 57.2mm (2.25")
5.8mm (0.23")