Tektronix P H A S E R Phaser 840 - Manual (Page 13)

11
Loading Media Trays
1 Fan the media to help separate the sheets.
2 Use the tray’s maximum-capacity label to determine how
much media to load.
3 Load media with the side to be printed face-up .
a Load transparencies with the notch at the back
of the tray.
b For single-sided printing, load letterhead paper
with the top of the page at the front of the tray.
For double-sided printing on letterhead, refer to
page 15.
4 Place the media snugly against the inside front wall of
the tray.
5 Set the media switch on the side of the printer for the
appropriate media.
6 Insert the tray into the printer.
If you are loading labels in the Paper/Transparency tray, set the
media switch to Paper. 9102-06
Paper
Transparency
2
4
3a
1
6
23 45 67
3b
5
Transparency
Paper