Adding ink – Tektronix P H A S E R Phaser 840 User Manual
Page 18

16
Adding Ink
Use only Phaser 840 printer ColorStix
®
ink; other
Phaser ColorStix ink will not fit this printer and will
damage it if used. Keep ink in its packaging until you
are ready to use it.
1
Open the top cover. A color-coded label inside the top
cover corresponds to the color of each ink-loading bin.
2
Remove the ink stick from its packaging.
3
Place the appropriate color ink stick into the ink-loading
bin that appears low. Do not force the ink sticks into the
ink-loading bins.
4
Close the top cover.
The front panel may read
Melting Ink
until the
printer is ready for printing.
Each ink stick is uniquely shaped to fit into the correct
ink-loading bin. Insert the ink stick’s narrow end first.
To avoid ink jams, never insert broken ink sticks into the
ink-loading bins.
9102-53
Consumables