Toshiba SD-KV550SU - Manual (Page 37)

37
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Notes:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to “L1” or
“L2”.
Notes:
• If the timer symbol (
) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press EJECT to remove the cassette tape.
• During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, first press TIMER REC, then press
VCR DVD selector to change to VCR mode. After VCR mode is
selected, press TIMER REC again to put the VCR into timer
recording standby mode.
• If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
• After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock
24 and
reprogram any timer recording.
Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.
Preparation:
• Press VCR DVD selector to select the VCR mode.
• Load a cassette tape with the erase prevention tab
intact.
• Check the time and date are correct 24 .
Example: Program a timer recording for the 26th day,
channel 125 (Cable TV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1
Press SET + or – to select one of the program
line, then press ENTER. 2
Press SET + or – to select the date, then press
ENTER. 3
Set the start time, end time, channel and tape
speed as in step 3. 4
MENU
ON
ON
OFF
OFF
TIMER REC SET
SAP
CH SETUP
SYSTEM SETUP
+/Ð/ENTER/MENU
AUTO REPEAT
〈+/—/ENTER/CANCEL/MENU 〉
DATE START END CH
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — —— —
—
—
—
—
—
—
26(SA) 11:00 PM 11:30 PM 125 SLP
〈+/—/ENTER/CANCEL/MENU 〉
DATE START END CH
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — —— —
—
—
—
—
—
—
26(SA) 11:00 PM 11:30 PM 125 SLP
To enter other programs, repeat step 2
through 4.
• To return to the normal screen,
press VCR MENU twice.
5
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR standbys
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode. If you
do not use the DVD, turn the power
off.
6
Notes:
• The timer recording will start at 5 seconds before the
preset starting time.
• If the timer symbol ( ) does not appear on the display
when TIMER REC is pressed, the cassette is not inserted
29 .
• If the cassette is ejected when TIMER REC is pressed, the
erase prevention tab of the cassette may have been
removed
29 .
SET +/–
VCR DVD
ENTER
CANCEL
VCR MENU
EJECT
〈+/Ð/ENTER/CANCEL/MENU〉
DATE START END CH
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р Р Р Р Р Р Р : Р Р Р : Р Р Р Р Р
Р
Р
Р
Р
Р
Р
Р
Р
〈+/—/ENTER/CANCEL/MENU 〉
DATE START END CH
— — — — — —— : — — — : — — — ——
— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
— — — — — —— : — — — : — — — ——
—
—
—
—
—
—
—
—
26(SA)
TIMER REC
2I30201B-En_p32-37 1/13/06, 2:48 PM 37