Tektronix Phaser 8200 - Manual (Page 32)

18 Phaser® 8200 Color Printer
Lo
ad
in
g T
rays
Loading Trays
For a list of the recommended paper, transparencies, and labels that
can be used in each type of tray, refer to page 14.
Loading the Standard Paper/Transparency Tray
You can also refer to the labels inside the tray for loading instructions.
1. Pull out the tray.
2. Load the print media.
■
One-sided job — Load paper with the side to be printed face
up. Load letterhead paper face up with the letterhead toward
the front of the tray. Load transparencies with the side to be
printed face up and the notch in the back-right corner of the
tray.
■
Two-sided job — Load paper with the side to be printed first
face down. Place letterhead paper face down with the
letterhead toward the back of the tray. For more information
on two-sided printing, refer to page 40.
Note
Make sure that you place the paper or transparencies under
the tabs in the back of the tray.
0726-54