TRENDnet TEG-S3000I - Manual (Page 32)

30
4. Negotiation: set auto negotiation status of port.
5. Speed/Duplex: set the port link speed and duplex mode.
6. FC: enable or disable Flow control function (Flow control for full duplex link mode).
7. BP: enable or disable Back Pressure function (Backpressure for half duplex
mode).
8. Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps.
It supports individual control method of TX and RX.
9. Priority: set port to high or low priority.
10. Security: enable or disable port security function.
11. Select the <Save>.
Port Configuration interface
Trunk Configuration
You can configure port trunk group.
1. Select <Edit>
2. Using “Tab” key move to the port that want to be added as trunk group.
3. Using “Space” key to mark the port.
4. Using Tab key move to Trunk# (ex. Trunk1, Trunk2…) to change the Trunk# value