TRENDnet TEG-S3000I - Manual (Page 66)

64
802.1x Setup interface
System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
1. Select <Edit>
2. Radius Server IP: set the Radius Server IP address.
3. Shared Key: set an encryption key for using during authentication sessions with
the specified radius server. This key must match the encryption key used on the
Radius Server.
4. NAS, Identifier: set the identifier for the radius client.
5. Server Port: set the UDP destination port for authentication requests to the
specified Radius Server.
6. Accounting Port: set the UDP destination port for accounting requests to the
specified Radius Server.
7. Select <Save>