Toshiba P32LS1 - Manual (Page 25)

25
How to install the monitor on the wall
1. Remove the stand of the LCD monitor
• To avoid damage, spread blanket on the table to put the
LCD monitor on.
• To remove the stand of the LCD monitor, put the LCD
monitor on the edge of the table, and remove the screws
on the stand.
• Described below is one example of how to install the unit
on the wall. The wall hanging accessory will need to be
manufactured according to the installation, so consult your
dealer before the installation work.
2. Wall hanging accessory
Wall hanging accessory is available at the shop.
∗
: In the package, the bracket and the frame of wall hanging
accessory are assembled. Please separate the bracket and
the frame at first. After the bracket is fixed on the wall, fix
the frame on the LCD monitor.
3. Remove the frame from the bracket.
Hold the lower part of the frame and raise it up to remove
from the bracket.
4. Fix the bracket on the wall
• Fix the bracket on the wall firmly with anchors or screws
(not supplied).
Make sure anchors or screws are stable.
(Choose appropriate anchors or screws depending on the
structure and material of the wall.)
• Refer to the chart on page 24 to check the condition of the
wall, and choose the safe and appropriate way for
installation.
The wall (Bracket)
Frame
Bracket