Toshiba P32LS1 - Manual (Page 30)

30
Power on/off
Before turn on, wire all the cable connecting to auxiliary equipment, external speakers, power cord, etc.
There are two controls for power, Main power switch and POWER (standby / on) button.
L Main power switch
L POWER button on the Remote control
About the control by the POWER button on the unit side on, refer to page 12.
POWER button on the Remote control
You can switch Power standby to On by pressing this button.
If Main power switch is not On, you cannot turn on the unit by the POWER (Standby / On) button.
Bottom Front
Connect power cord and press “–” side of
the switch, then Power Standby / On
indicator lights on green.
Power Standby / On indicator
When the power is on, the Power Standby / On indicator lights on
green.
When the power is in the standby mode, the Power Standby / On
indicator lights on red.