TRENDnet Cable Modem/xDSL TW100-W1CA - Manual (Page 44)

- 40 -
Diagnosis
TCP/IP Network Diagnosis
Execute WINIPCFG.EXE or PING.EXE for TCP/IP network diagnosis.
WINIPCFG
The WINIPCFG program (for Win95, 98, and 98Me) is used to gather information about the
TCP/IP connections that are active on your system. It cannot be used to dynamically adjust
TCP/IP connections. You can also renew leases (if allowed by the network), and get the
current IP address assignments through this program.
From Windows, go to Start, click Run, enter WINIPCFG, and click OK.
Figure 33: Run WINIPCFG
The following figure displays the adapter address and current TCP/IP address.
Note: At the “Ethernet Adapter Information”, select the correct Ethernet adapter that is
installed in this computer.
Figure 34: IP Configuration
Click the More Info button to get detailed configuration information.
Select the correct
Ethernet adapter.