TRENDnet Cable Modem/xDSL TW100-W1CA - Manual (Page 7)

- 3 -
LED Color Status
Indicator
Glowing Dim Flashing
? Power
Green Power On Power Off N/A.
? Local Link Green
Connected to a LAN
device Disconnected from
any LAN device Receiving/
Sending data
? Local
100/10
Green 100Mbps detected 10Mbps detected N/A.
? Local
Full/Half
Green Full duplex Half duplex N/A.
? Global
Link
Green Connected to a
Cable/DSL Modem Disconnected from
any Cable/DSL
modem Receiving/
Sending data
? (blank)
Green Internet connected
1
Internet disconnected N/A
? Error
Red Components
malfunctioning N/A. N/A.
Table 1: LED Indicators
Port Name Functions
a VDC IN Connects the power adapter plug.
b Console Connects an RS-232 serial cable to your computer for
??
Configuring from terminal programs
??
Firmware upgrade.
c Global Connects to Ethernet port on Cable Modem or DSL Modem for Internet
Access.
d Local Connects to the Ethernet Hub/Switch on LAN.
Table 2: Connections Ports
1
For Cable modem connection, it means the device has received an IP address from the ISP.
For DSL modem connection, it means PPPoE connection has been established.