Taylor AC-1200-BL - Manual (Page 7)

7
HOW TO USE YOUR BLENDER
• Place the unit on a flat, sturdy surface with adequate clearance (i.e., do not
place under wall cabinets or on carpeting or other soft surfaces). This appli-
ance is not for use in convection, or conventional ovens, microwaves, or on
stovetop.
• Make sure the appliance is switched off and unplugged.
• Wash and dry all components thoroughly as stated above.
• Assemble with blender components. Always be sure that the appliance is
properly assembled before using. Blender blades are extremely sharp; never
touch the cutting edge of blades.
• Add ingredients to the blender a little at a time to ensure proper blending and
to prevent overflow. Never fill container more than ¾ full; the action of the
blade will cause ingredients to rise in the container. Make large recipes in
multiple batches.
• Unless the recipe states differently, pour liquid ingredients into the blender be-
fore solid ingredients. The liquid will help the processing time go faster and at
a lower speed. Always add 1 cup of liquid before processing ice.
• Place the cover and measuring cup onto the blender.
• Plug the appliance into the power outlet.
• Switch on by pressing the 2 speed button continuously. The blender operates
with pulse control – press the button once and the blender will operate for 45
seconds then stop automatically. Press the button again to operate for an addi-
tional 45 seconds.
• Reverse the above procedure to remove the blender cover and container.