Toshiba B-SX6T Series User Manual
Page 126
APPENDIX 2 INTERFACE
ENGLISH VERSION EO1-33056
APPENDIX 2 INTERFACE
EA2- 3
USB interface
Standard:
Conforming to V2.0 Full speed
Transfer type:
Control transfer, Bulk transfer
Transfer rate:
Full speed (12M bps)
Class: Printer
class
Control mode:
Status with the receive buffer free space information
Number of ports:
1
Power source:
Self power
Connector: Type
B
Pin No. Signal
1 VCC
2 D-
3 D+
4 GND
LAN
Standard:
IEEE802.3 10BASE-T/100BASE-TX
Number of ports:
1
Connector: RJ-45
LED status:
Link LED
Activity
LED
LAN cable:
10BASE-T: UTP category 3 or category 5
100BASE-TX: UTP category 5
Cable length:
Segment length Max. 100 m
LED
LED Status
LAN status
ON
10Mbps link or 100Mbps link is detected.
Link
OFF
No link is detected.
* Communication cannot be made while
the Link LED is off.
ON Communicating
Activity
OFF Idle
NOTES:
1. For IP address setting, refer to Section 2.8.7 IP Address Setting (TCP/IP).
2. When a generally-used twisted pair Ethernet (TPE) or UTP cable is used, a communication error may
occur depending on your operating environment. In such case, you may be requested to use a shielded
twisted pair cable.
Link LED (Green)
Activity LED (Orange)
Series B Plug