Tektronix PHASER 740L - Manual (Page 14)

12 Printing Envelopes
1 Prepare each envelope: tuck in the envelope flap.
2 Adjust the printer’s media thickness switch to Thick .
3 Adjust the printer’s media guides for the width of your envelopes.
4 Insert the envelopes (maximum capacity is 10-15, depending on
thickness):
5 At the front panel prompt, scroll to Card or Envelope and press OK .
6 In the front panel’s Printer Defaults menu, scroll to Multi-Purpose
Media and select #10 Envelope under Media Size .
■ Short end enters first .
■ Side to be printed is face-up .
■ The edge where you place the stamp enters the printer first in
some applications; make a test print before proceeding.
33100-47
Place Stamp Here
Place Stamp Here
3
2
4
1