Tektronix PHASER 740L - Manual (Page 20)

18 Manual Duplex Printing: Multi-Purpose Tray
Side 1
For a multi-page document, print odd-numbered pages for Side 1.
(This selection is application-specific).
1 Insert paper with the side to be printed face-up . This example shows
letterhead paper.
2 In the printer’s front panel, select the media type at the prompt.
3 In the Print screen (using a supported driver), select Multi-Purpose
Tray as the Paper Source or Tray Selection. Send the job to the
printer.
4 Remove the printed paper from the output tray.
Front panel selection Media type
Paper: Standard laser paper 90 - 105 g/m 2 , 24 - 28 lb.
Coated Paper: Tektronix Glossy Coated paper
Card or Envelope:
Card stock
Heavy laser paper 109 - 150 g/m 2 , 29 - 40 lb.
Two-sided printing on specialty media can
shorten component life.
For best results with duplex printing, use 90 g/m 2
(24 lb.) laser paper.
32564-06
1 2 3 4 5 6 7
Duplex Printing