Toshiba D-VR3SG - Manual (Page 24)

English - 47
S
ystem Setup
46 - English
• RGB : Sends RGB signal from the AV JACK
(SCART terminal)
• Video : Sends COMPOSITE VIDEO signal from
the AV JACK (SCART terminal).
AV1 Output Video
RGB
Front Display : Automatic
NICAM : On
Programme
NICAM
AV 1 Output
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (transmis-
sion in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound.
5 To... Press › or ‚ , until...
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM broad-
cast if the stereo sound is dis-
torted due to inferior reception
conditions.
NICAM mode On is displayed.
On: Normally set at this position.
Select “Setup”
Using the ›‚ buttons, move the selection bar
to “Setup” then press Š or OK button to select.
2
Open “MENU”
With the VCR in play mode, Press the MENU
button.
1
On completion, press RETURN three times to
exit the menu. 6
Select “System”
Using the ›‚ buttons, move the selection bar
to “System” then press Š or OK button to select.
3
Programme
VCR
Front Display : Automatic
NICAM
AV1 Output
OFF
On Programme
Select “NICAM”
Using the ›‚ buttons, move the selection bar
to “NICAM” then press Š or OK button until
NICAM option is selected.
4
Front Display
You can set the Front Panel Display to be bright all the
time, dim all the time, dim during power off.
Open “ MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the ›‚ buttons, move the selection bar
to “Setup” then press Š or OK button to select.
2
Select “System ”
Using the ›‚ buttons, move the selection bar
to “System ” then press Š or OK button to
select.
3
Programme
Set “Front Display”
Move the selection bar to “Front Display,” then
press
Š or OK button to select from the follow-
ing options:
• Automatic – Front Panel Display will dim
auto- matically during power off.
• Bright – Front Panel Display will be bright
all the time.
• Dim – Front Panel Display will be dim
all the time.
4
NICAM
AV1 Output Programme
S
ystem Setup