Problems and solutions (vcr), Troubleshooting, Reference – Toshiba D-VR3SG User Manual

Page 55

Advertising
background image

English

- 109

R

eference

Problems and Solutions (VCR)

Before contacting a Toshiba authorized service center, perform the following simple checks.

Problem Explanation/Solution

No power

‹

Check that the power plug is connected to a wall outlet.

‹

Have you pressed the ON/STANDBY button?

You cannot insert a video cassette

‹

A video cassette can only be inserted with the window
side up and the safety tab facing you.

The television program was not recorded

‹

Check the DVD Recorder-VCR antenna connections.

‹

Is the DVD Recorder-VCR tuner properly set?

‹

Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful

‹

Re-check the recording start/stop time settings and the current time

‹

Check whether you insert a tape which has enough time record

No playback picture or the picture

‹

Check to see if you are using a prerecorded tape.

is distorted

You cannot see normal broadcasts

‹

Check the TUNER/EXTERNAL setting. It should be on TUNER.

‹

Check the TV antenna connections.

Noise bars or streaks on playback

‹

Press the PROG/TRK (

/

) buttons to minimize this effect.

When the

Š

II

button is pressed

‹

A still picture may have “noise bars”, depending on the

during playback, the still picture

condition of the tape. Press the PROG/TRK (

/

) buttons

has severe “noise bar” streaks

during SLOW motion to minimize this effect.

Video Head Cleaning

‹

If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.

If you are unable to solve the problem after reading the above instructions, note:

‹

The model and serial number on the rear of your DVD Recorder-VCR

‹

The warranty information

‹

A clear description of the problem

Then contact your nearest TOSHIBA authorized service center.

108 -

English

R

eference

Troubleshooting

You cannot use the operation or function due to one of the following reasons:
(1) Your DVD disc does not support the feature (for example, angles)
(2) You've requested a title, chapter, or scan time that is out of the correct range.

The disc does not support all the selected functions.
In this case, some settings you configure on the Setting menu may not work properly.

Aspect ratio is fixed for DVD disc.

Check whether you selected correct digital output options in the Audio Output Options
menu.

Did you move your DVD Recorder-VCR suddenly from a cold place to a warm place?
In this case, remove discs and wait for one to two hours with the power on, and then,
insert the disc and try to playback again. It will work properly when condensation is
removed.

Angle operation is available only when the disc contains the images captured at
different angles.

• Check whether there is damage or foreign materials on your disc.
• Some discs with bad manufacturing quality may not be played back.
• If the scene changes from dark to bright suddenly, the screen

may jitter temporarily, but it is not a defect.

Sound languages and subtitle languages are disc-specific.
Only the sound and subtitle languages contained on a DVD disc are
available and displayed on the disc menu.

• Point the remote control at the remote control sensor on your DVD recorder-VCR.

Operate within distance. (15ft)

Remove obstacles between your DVD Recorder-VCR and remote control.

• Check whether the batteries are depleted.

• Read the table of contents and then find and read the sections

describing your problem, and follow the directions given.

• Turn the unit off and on.
• If your problem still persists, contact your nearest Toshiba service center.

Play mode settings
are different from the
settings configured
with the Setting menu.

Cannot change the
aspect ratio.

No audio output.

No video or audio out-
put. The disc tray is
ejected after 2 to 5 sec-
onds.

Angle operation does
not work during play-
back of a DVD disc.

The disc revolves,
but no image or bad
quality images are
output.

Desired sound
language and
subtitle language
are not played.

icon appears on

the screen.

The remote control
doesn't work.

Other problems

Advertising