Teac PortaDVD - Manual (Page 17)

TEAC PortaDVD User’s Manual 11
Installing the PortaDVD Driver Using the Windows Wizard
The following sections explain how to install the PCMCIA driver using
the Windows
Add New Hardware Wizard.
For Windows 98/Me/2000
The installation procedure for the PCMCIA Card Driver varies depending
on the version of Windows 98/Me/2000 installed in your computer.
To install the driver on a Windows 98/Me/2000 system, follow these
steps:
1. Insert the PCMCIA card into the PCMCIA card slot in your laptop
computer.
The other end of the card/cable should already be connected to the
interface connector on the PortaDVD. (For more information, see
“Connecting the PortaDVD” on page 6.)
The system displays the initial Add New Hardware Wizard panel.
Figure 10. Add New Hardware Wizard
Note: The panels the Wizard displays are determined by your system con-
figuration and your responses to the dialog. Do not be concerned if your
installation process varies slightly from the one described. Please simply
follow the dialog presented.
PortaDVD.book Page 11 Saturday, February 17, 2001 7:25 PM