Teac PortaDVD - Manual (Page 25)

TEAC PortaDVD User’s Manual 19
2. Insert a DVD, CD-ROM or audio CD into the drive. Make sure
the disc label faces up.
Press the disc gently down onto the spindle, if necessary, until it
snaps securely into position.
3. Press the Open/Eject button to retract the disc tray into the drive.
Figure 24. Inserting a Disc
Ejecting a Disc
1. To eject a disc, first make sure the disc has stopped spinning. Then
press the
Open/Eject button on the front panel.
The PortaDVD partially extends the disc tray. Grasp the front bezel
and slide the tray fully open.
2. Carefully remove the disc.
You may need to press a finger on the spindle or chassis to stabilize
the drive.
3. Press the Open/Eject button again to retract the disc tray into the
drive.
PortaDVD.book Page 19 Saturday, February 17, 2001 7:25 PM