TANDBERG D13187-03 - Manual (Page 41)

TANDBERG Gateway
41
Configure the Gateway
Static IP Address
The Static IP Address defines the network address of the gateway. This address is only used in static mode. Your
LAN administrator will provide you with the correct address for this field.
Static IP Subnet Mask
The Static IP Subnet Mask defines the type of network. Your LAN administrator will provide the correct value for
this field.
Static IP Gateway
The Static IP Gateway defines the Gateway address. Your LAN administrator will provide the correct value for this
field.
NTP
The NTP Service defines the address of the NTP server. Your LAN administrator will provide the correct value for
this field.
Save
When ready to store the new settings, press ‘Save’. These settings will take effect when the system is restarted.
Restart
This button will restart the gateway. Any changes made in IP Configuration and IP Service will then take effect.