Displaying tv status information, Understanding the auto power off feature – Toshiba 32E20U User Manual

Page 50

Advertising
background image

Chapter 6: Using the TV’s features

50

Note:

If you select Enable REGZA-LINK Off, the

other items will be grayed out.

4無

Press p or q to highlight the

REGZA-LINK Setup

item you want to use, and press t or u to select
On or desired mode.

TV Auto Input Switch: On/Off

TV Auto Power: On/Off

Device Auto Standby: On/Off

Speaker Preference: TV Speakers/Audio Receiver

5無

To save the new settings, highlight

Done and press

. To revert to the factory defaults, highlight

Reset and press

.

Displaying TV status information

To display TV status information using

RECALL:

Press

on the remote control.

The following information will display (if applicable):

Current input (

ANT/CABLE, VIDEO 1, etc.)

If ANT/CABLE is the current input, either “CABLE”
(for cable TV) or “ANT” (for over-the-air broadcasts).

Channel number (if in

ANT/CABLE mode)

Channel label (if set)

Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signal only)

Stereo, Mono or SAP audio status (when HDMI input
mode, Dolby Digital or PCM)

Video resolution

Aspect ratio of incoming video signal (4:3 or 16:9)

V-Chip rating status

Game Timer (if set)

To close the RECALL screen:

Press

again.

To display TV status information using INFO:

Press

on the remote control.

The following additional information will display for
off air digital channels (if applicable):

Title

Duration

Detailed description

Note:

The location of the banner can be moved

to the top or bottom of the screen by pressing p

or q while the RECALL or INFO display is on-

screen.

Understanding the auto power off

feature

The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast for the
day. This feature functions in

ANT/CABLE mode only.

Understanding the last mode

memory feature

If the power is cut off while you are viewing the
TV, the Last Mode Memory feature automatically
turns on the TV when the power is resupplied.
Note:

If it’s possible, and you will be away

from the TV for an extended period of time you

should unplug the power cord.

Advertising
This manual is related to the following products: