Removing the pedestal stand – Toshiba 32E20U User Manual

Page 6

Advertising
background image

6

Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a

flat, cushioned surface such as a quilt or blanket.

Leave the stand protruding over the edge of the

surface.
Note:

Extreme care should always be used

when removing the pedestal stand to avoid

damage to the LCD panel.

2) Remove the four screws shown in the right

diagram. This will allow removal of the pedestal

stand.

3) Once you have removed all four screws, holding

the pedestal stand in place, remove the pedestal

stand from the TV.

CAUTION: Always place the TV on the floor or a sturdy,

level, stable surface that can support the weight of

the unit. To secure the TV, use a sturdy strap from

the hook(s) on the rear of the TV to a wall stud, pillar,

or other immovable structure. Make sure the strap is

tight, secure, and parallel to the floor.

37” TV

Four screws

VESA Mounting Pattern

Hook

Sturdy strap
(as short as possible)

Four screws

32” TV

VESA Mounting Pattern

Hook

Sturdy strap
(as short as possible)

40” TV

Four screws

VESA Mounting Pattern

Hook

Sturdy strap
(as short as possible)

Advertising
This manual is related to the following products: