Topcom 2000 - Manual (Page 63)

64
Butler 2000
64 64 64 64 64 64
Note : You can desubscribe each handset except the one you are descubscribing with and “Multi 1”.
For ex. handset number 3 (Multi 3) can’t desubscribe handset number 1 (Multi 1) nor itself (Multi 3).
You can desubscribe the other handsets.
5.5 Speaker volume
The speaker volume can be adjusted. There are three volume levels : low “VOL LOW”,
medium “VOL MIDDLE” and high “VOL HIGH”. During a phone conversation the
volume can be adjusted temporarily by using the Volume button .
5.5.1 Adjusting the Speaker Volume
• Press the Function button until “EAR VOLUME”
is displayed.
• Press the OK button.
• Select the desired volume level, for ex.
“VOL MIDDLE”
• Press the OK button to confir m .
• The unit returns to the “EAR VOLUME” menu.
5.6 Ringing tones
The ring volume and melody can be selected independently for internal and external
calls. The external ringing tone is set up in menu “H-EXT RING”, the internal ringing
tone in menu “H-INT RING”. In both menus, first the ring melody can be selected,
then the ring volume. Nine melodies and nine volume levels are available.
5.6.1 External Ring Volume and Melody
M E L O D Y
• Press the Function button until “H-EXT RING” is
shown on the display.
• Press the OK button.
• When the menu “MELODY” is displayed, press
the OK button.
• The present melody “MELODY 1” is displayed.
• Press the Function button. The melody numbers
from 1 to 9 and OFF are shown on the display.
• Select the desired melody and press the OK button.
• The unit returns to the “H-EXT RING” menu.
EAR VOLUME
VOL MIDDLE
EAR VOLUME
H--EXT RING
M E L O D Y
MELODY 1
H--EXT RING