Installation – Teledex B120D User Manual
Page 6
5. INSTALLATION
5.1 DESKTOP INSTALLATION
1)
Plug one end of the handset coiled cord into the handset. Plug the other
end of the cord into the handset jack located on the left side of the phone
base.
2)
Place the handset in the handset cradle.
3)
Plug one end of the supplied line cord into the LINE jack on the bottom of
your phone. Then route the line cord through the left slot of the desk/wall
mount bracket.
4)
Plug the other end of the modular cord into the wall jack.
5.2 WALL MOUNTING
1)
Plug one end of the handset coiled cord into the handset. Plug the other
end of the cord into the handset jack located on the left side of the phone
base (please refer to figure 3.)
2)
Place the handset in the handset cradle.
3)
Remove the desk/wall mount bracket from the bottom of the B120D.
Rotate the bracket 180º and reinstall it into the four slots the bottom
of the B120D.
4)
Connect the short line cord into the LINE jack on the bottom of your
phone. Connect the other end of the line cord to the line jack on the wall
mount plate.
5)
Slip the phone onto the wall plate jack, lining up the wall mounting holes,
and then slide the telephone down so it is firmly in place.
4
HANDSET JACK
FIGURE 3
FIGURE 4