Using the data port, Adjusting the ringer volume – Teledex B120D User Manual

Page 7

Advertising
background image

5.3 WALL MOUNTING CLIP

1)

Located on the front of the telephone, above the speaker grill, is the wall

mounting clip. Remove this clip by firmly pushing it upward, in the

direction of the hook switch.

2)

Rotate the clip 180º so that the side with the protruding edge is towards

the top. This edge will hold the handset (please refer to figure 5.)

6. USING THE DATA PORT

The data port is located on the right hand side of the telephone, as it is facing you.

Use this jack to connect a laptop or desktop computer, answering or fax machine in

parallel to the same phone line to which the telephone is connected.

7. ADJUSTING THE RINGER VOLUME

Your B120D has three ringer volume levels: Off, Low and High. To adjust, slide the

switch located along the right hand side of the telephone to the desired ringing level.

5

FIGURE 5

FIGURE 6

FIGURE 7

WALL MOUNTING CLIP

DATA PORT

RINGING
VOLUME

RING
CADENCES

Advertising