Ariston ARTXD 149 - Manual (Page 17)

GB
17
Fig. 1 Fig. 2
Fig. 3 Fig. 4
How to open and to close the drum
A) Opening (Fig. 1):
Lift the external lid and open it completely.
B) Opening the drum (Soft opening):
With one finger, push the button indicated in fig. 2
and the drum will open delicately.
C) Loading the washing machine (Fig. 3).
D) Shutting (Fig. 4):
- close the drum fully by first shutting the front door
followed by the rear one;
- then ensure the hooks on the front door are
perfectly housed within the seat of the rear door;
- after the hooks have clicked into position, press
both doors lightly downwards to make sure they do
not come loose;
- finally shut the external lid.
E) Drum End Stop (Fig. 2):
Once the wash cycle has been completed, the drum will
position itself with doors facing upward for ease pf opening.
The display is useful when programming the machine
and provides a great deal of information.
The two upper strings A and B provide details of the
wash cycle selected, the wash cycle phase in
progress and all information relating to the progress
status of the wash cycle.
String C shows the time remaining until the end of the
wash cycle in progress and, if a DELAYED START has
been set, the time remaining until the start of the
selected wash cycle.
String D shows the maximum spin speed value (this
depends on the selected wash cycle); if the wash
cycle does not include a spin cycle, the string remains
unused.
String E shows the maximum temperature value
which may be selected (this depends on the wash
cycle used); if the temperature of the wash cycle
cannot be modified, the string remains unused.
Indicator lights F correspond to the functions and light
up when the selected function is compatible with the
set wash cycle.
Door locked symbol
If the symbol is lit, this indicates that the washing
machine door is blocked to prevent it from being
opened accidentally. To prevent any damage from
occurring, wait for the symbol to switch itself off
before opening the appliance door (it will take about
three minutes).
N.B.: if the DELAYED START function has been
activated, the door cannot be opened; pauses the
machine by pressing the START/PAUSE button if you
wish to open it.
 The first time the machine is switched on, you will
be asked to select the language and the display will
automatically show the language selection menu.
Display
A
B
C
D
E
F
To select the desired language press the
TEMPERATURE and SPIN buttons; to confirm the
selection press the CONTROL PANEL LOCK button.
If you wish to select another language, press and hold
the CONTROL PANEL LOCK + TEMPERATURE +
SPIN buttons simultaneously for 5 seconds, then
repeat the steps listed above.