Ariston ARTXD 149 - Manual (Page 19)

GB
19
Description of the wash cycle
Max .
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max.
load
(kg)
Cycle
duration
Prewash Bleach Wash Fabric
softener
Everyday wash cycles (Daily)
Cotton (1) (1 st press of the button) : extremely soiled whites. 90° 1400 l l l l 6
Cotton (2)
(2 nd press of the button)
: heavily soiled whites and resistant colours. 60° 1400 l l l l 6
Cotton (3) (3 rd press of the button) : heavily soiled whites and delicate colours. 40° 1400 l l l l 6
Synthetics
(1 st press of the button)
: heavily soiled resistant colours. 60° 800 l l l l 2,5
Synthetics (2 nd press of the button) : lightly soiled resistant colours. 40° 800 l l l l 2,5
Mix 30' (1 st press of the button) : to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
30° 800 - - l l 3
Mix 15' (2 nd press of the button) : to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
30° 800 - - l l 1,5
Special cycles / Memory
Baby cycle: heavily soiled delicate colours. 40° 800 - l l l 2
Memory: allows for any wash cycle to be stored.
Silk/Curtains: for garments in silk and viscose, lingerie.
30° 0 - - l l 1
Wool: for wool, cashmere, etc. 40° 600 - - l l 1
Partial wash cycles
Fast Spin (1 st press of the button)
- 1400 - - - - 6
Slow spin
(2 nd press of the button)
- 800 - - - - 2,5
Rinse cottons (1 st press of the button)
- 1400 - l - l 6
Pump out
(2 nd press of the button)
- 0 - - - - 6
Wash cycles and functions
Wash functions
Stain removal
This function is particularly useful for the removal of
stubborn stains.
To run the bleach cycle on
its own, pour the bleach
into compartment 4, set
the "Rinse" programme
and activate the "Stain
removal" programme. To
bleach during a wash
cycle, pour in the
detergent and any fabric
softener you wish to use,
set the desired wash cycle
and enable the "Stain
removal" function.
 It cannot be used with the , , , and “Pump
out” programmes.
Prewash
If this function is selected, the pre-wash cycle will run;
this is useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
 It cannot be used with the , , , , ,
programmes.
Table of wash cycles
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is
guaranteed. It is particularly useful for sensitive skin.
 It cannot be used in conjunction with the , and
“Pump out” programmes.
Easy iron
By selecting this function, the wash and spin cycles
will be modified in order to reduce the formation of
creases.
The wash cycles ends with the laundry being left
to soak in the machine; the EASY IRON and START/
PAUSE indicator lights will flash (orange) and the text
"STOP WITH WATER" will appear on the display. To
drain the water so that the laundry may be removed,
press the START/PAUSE button or the EASY IRON
button.
 It may not be used with the , , , and “Pump
out” programmes.
Fast wash
Reduces the duration of the wash cycle, while
making it possible to save water and electricity.
 It cannot be used with the , , , , ,
programmes.
The
duration
of
the
wash
cycles
can
be
checked
on
the
display
.
Wash
cycles
M
The information contained in the table is intended as a guide only.
For all Test Institutes:
(1) Test wash cycle in compliance with regulation EN 60456: set wash cycle (1 st press of the button) with a temperature of 60°C.
(2) Long wash cycle for cottons: set wash cycle (2 nd press of the button) with a temperature of 40°C.
(3) Short wash cycle for cottons: set wash cycle (3 rd press of the button) with a temperature of 40°C.