Power management, Using additional batteries, Charging batteries – Toshiba SATELLITE P500 User Manual

Page 115: Power management using additional batteries

Advertising
background image

115

Mobile Computing

Charging batteries

TECHNICAL NOTE: Depending on your system, the RTC battery may
only charge while the computer is turned on.

Power management

Your computer ships with the power management options preset to
a configuration that will provide the most stable operating
environment and optimum system performance for both AC power
and battery modes.

Changes to these settings may result in system performance or
stability issues. Users who are not completely familiar with the power
management component of the system should use the preset
configuration. For assistance with setup changes, contact Toshiba’s
Customer Support Center.

Using additional batteries

In addition to the main battery, you may also have an optional
secondary battery (not included with your computer). If you travel
and need to work for many hours without an AC power source, you
may purchase a battery module for use in the computer, or carry
additional charged battery packs with you. You can then replace a
discharged battery and continue working.

For more information on batteries and accessories, see

accessories.toshiba.com

.

Charging batteries

The battery needs to be charged before you can use it to power the
computer.

Never leave batteries in the battery charger for more than a week at a
time. Doing so may reduce the potential charge of the battery.

Always use the battery charger specified by Toshiba. You can order a
Toshiba battery charger from Toshiba’s Web site at

accessories.toshiba.com

.

Battery charge time may vary depending on the applications, power
management settings, and features used.

NOTE

Advertising