Topcom Butler 2000 C - Manual (Page 51)

Butler 2000 C
• Press the OK button, the p rogrammed external
line number is shown on the display.
• P ress the Mute button 3
times, INPUT NUM’ appears
on the display.
• Press the OK button.
6 FUNCTIONS
6.1 The Base station
Handsets can be subscribed to 4 different base
stations. When a handset is subscribed to several
base stations, you can choose which base station
you want to work with.
Note : When you select “BASE NO:AUTO”, the
base unit is searched automatically. If there ar e
more than two base units, the handset selects an
arbitrary base station. This is only possible when the
handset is subscribed to several base units.
6.2 Select a base station
• P ress the Function button
until “SELECT BASE”
appears on the display.
• Press the OK button.
• The base number is
shown on the display,
for ex. “BASE NO:1”.
• Press the Function button.
• The base numbers appear on the display “BASE
NO:1 ~ 4, AUTO”.
• When the desired base number is shown on the
display, for ex.
“BASE NO : 2”, press
the OK button.
• Let’s assume that the
handset was subscribed to base unit 2 and that
the handset number is now “MULTI 1”. If you
want to subscribe this handset to base unit 2
again, select de base unit
“BASE NO: 2” and press
the OK button. Display :
“NEW BASE:2”
Note : If the handset
was never subscribed to
base station 2, the
following is displayed :
“NOT SUB2”.
• On the display “BASE :
2” is shown.
• Press the OK button to
subscribe the new base station.
• The unit returns to idle
mode, “MULTI 2” appears
on the display.
51 51 51 51 51 51 51 51 51
BASE NO : 2
INPUT NUM
SELECT BASE
BASE NO : 1
NEW BASE : 2
NOT SUB 2
BASE : 2
MULTI 2
B2000C 10/9/01 11:32 am Page 51