Turbosound MILAN MI5 - Manual (Page 15)

user manual
MILAN
MILAN user manual
Page 15
Connection Diagrams
Small band setup using the integrated mixer and Mix Out
The built in two channel mixer allows the simultaneous use of either two low impedance dynamic
microphones, a microphone and line level source, or two line level sources. The line level source
could be an acoustic instrument such as a guitar with either passive or active on-board electrics, a
keyboard, or MP3 player. Connect a dynamic mic directly to either of the combo jack/XLR input
connectors, switch the MIC/LINE switch to MIC and adjust the volume level. Connect line sources
to either of the combo jack/XLR connectors, switch the MIC/LINE switch to LINE and adjust the
volume control. More mics and sources can be connected by using the MIX OUT function to daisy-
chain to additional Milan loudspeakers.
LINE LINE MIC MIC
BASS TREBLE MIX OUT
BASS
MODE
LIMIT
-6dB
POWER
0
+
0
+
LEVEL INPUT 1 INPUT 2 LEVEL
MIN MAX MIN MAX
A B
LINE LINE MIC MIC
BASS TREBLE MIX OUT
BASS
MODE
LIMIT
-6dB
POWER
0
+
0
+
LEVEL INPUT 1 INPUT 2 LEVEL
MIN MAX MIN MAX
A B