Turbosound MILAN MI5 - Manual (Page 17)

user manual
MILAN
MILAN user manual
Page 17
Stereo PA with an external mixer and subwoofer(s)
In this example, sub frequencies are routed to a separate subwoofer(s) in order to gain extended
frequency response and higher overall sound level. Connect the mixer output first to the
subwoofers and then loop up to the Milan loudspeakers. Set the MIC/LINE switch to LINE and set
the BASS MODE switch to the ‘B’ position to roll off the low frequencies to the Milan MI5
loudspeakers. The tone controls on both cabinets should be set to the same positions, nominally
flat to begin with. Ensure that the mixer outputs are not clipping, and then adjust both
loudspeakers’ level controls to the desired loudness.
POWERED
SUB-BASS
POWERED
SUB-BASS
LINE LINE MIC MIC
BASS TREBLE MIX OUT
BASS
MODE
LIMIT
-6dB
POWER
0
+
0
+
LEVEL INPUT 1 INPUT 2 LEVEL
MIN MAX MIN MAX
A B
LINE LINE MIC MIC
BASS TREBLE MIX OUT
BASS
MODE
LIMIT
-6dB
POWER
0
+
0
+
LEVEL INPUT 1 INPUT 2 LEVEL
MIN MAX MIN MAX
A B