Telit Wireless Solutions Easy GPRS - Manual (Page 31)

Easy GPRS User Guide
80000ST10028 Rev. 1 - 14/03/07
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 31 of 37
dGVsaXQ= <cr><lf> (telit base64 encoding)
235 2.0.0 OK Authenticated
MAIL FROM: [email protected] <cr><lf> (Sender)
250 2.1.0 [email protected]... Sender ok
RCPT TO: [email protected] <cr><lf> (Receiver)
250 2.1.5 [email protected]... Recipient ok
DATA<cr><lf>
354 Enter mail, end with "." on a line by itself
Return-Receipt-To: < [email protected] ><cr><lf>
Reply-To: < [email protected] ><cr><lf>
From: < [email protected] ><cr><lf>
To: < [email protected] ><cr><lf>
Subject: Email test<cr><lf>
Date: Fri, 19 Sep 2003 11:41:32 +0200<cr><lf>
MIME-Version: 1.0<cr><lf>
X-Priority: 3 (Normal) <cr><lf>
X-MSMail-Priority: Normal<cr><lf>
X-Mailer: GM862 TELIT SW, Build 1.0.1000 (1.0.1111.0) <cr><lf>
Importance: Normal<cr><lf>
X-MimeOLE: Produced By GM862 TEST SW<cr><lf>
<cr><lf>
Content-Type: text/plain; <cr><lf>
charset="iso-8859-1"<cr><lf>
Content-Transfer-Encoding: 7bit<cr><lf>
<cr><lf>
This message is sent in order to test Easy GPRS feature. Hello World!<cr><lf>
<cr><lf>
. <cr><lf>
250 2.0.0 h8J9QNH3008461 Message accepted for delivery
QUIT<cr><lf>
221 2.0.0 smtp.domain.com closing connection
+++
NO CARRIER
The Telit module is now back in the command mode.